PWS6300 Series
Display : 3" 160x80 , Mono STN LCDCPU : 32 bits RISC Memory : 4MB Flash ROMI/O : COM2 (RS232,RS422,RS485)
替代機型 | PWS500S |
顯示器類型 | Mono STN LCD |
| 顯示器尺寸 | 3 〞 ( 對角線 ) |
分辨率 | 160×80 |
| 亮度 (cd/m2) | 35 |
處理器 | 32 bits RISC |
| 對比調整 | via VR |
顯示色彩 | 16 灰階 |
| 背光源 | LED |
背光燈管壽命 | 75,000 小時 |
| 運作狀態 LED | PWR & COM2 LEDs |
| 觸控面板 | ─ |
觸控次數 | >= 500,000 |
外部按鍵 | 十六個操作按鍵 |
內存 | 4MB |
| RTC( 可更換的鋰電池 ) | 有 |
| 數據 / 配方 內存 | ─ |
| 數據儲存 (CF 卡 ) | ─ |
| COM1 | ─ |
| COM2 | 9 腳母接頭 ( RS232/RS422/RS485) |
| 多功能端口 | ─ |
| USB Master | ─ |
| USB Device | ─ |
以太網絡 | ─ |
網絡接口 | ─ |
| 認證 | CE |
外觀尺寸 | 173.0mm×105.5mm |
開孔尺寸 | 160.8mm×93.3mm |
YAW-3000供應300噸全自動壓力試驗機
YAW-3000全自動壓力試驗機采用液壓加荷，電子測力，具有負荷數字顯示、加荷速率顯示、負荷最大值保持，以及過載保護和斷電數據保持等功能。
YAW-3000全自動壓力試驗機技術參數： 最大試驗力 3000kN 試驗力示值相對誤差 ≤±1% 上下壓板尺寸 370×370mm 上下壓板最大間距 330mm 活塞最大行程 50mm 活塞直徑 φ310mm 液壓泵額定壓力 40Mpa 電機功率 1.1 kW
WCB-30，WCB-50，WCB-75WCB-30系列油泵
產品概述： WCB型齒輪油泵屬于低壓力微型手提式節能輸油泵，最適用于無動力電源的出售單位油桶軸油，也適用于煉油廠、電廠、電站、變電所（室）及油庫輸油。稀油潤滑系統的稀油轉運。如：輸送無潤滑性的油料、飲料、低腐蝕性的水等，請選用整體不銹鋼齒輪泵，本廠均有生產。
產品概述： WCB齒輪油泵（防爆型、防爆不銹鋼型）： WCB型齒輪油泵屬于低壓力微型手提式節能輸油泵，最適用于無動力電源的出售單位油桶軸油，也適用于煉油廠、電廠、電站、變電所（室）及油庫輸油。稀油潤滑系統的稀油轉運。如：輸送無潤滑性的油料、飲料、低腐蝕性的水等，請選用整體不銹鋼齒輪泵，本廠均有生產。
|
|
產品概述： WCB齒輪油泵（防爆型、防爆不銹鋼型）： WCB型齒輪油泵屬于低壓力微型手提式節能輸油泵，最適用于無動力電源的出售單位油桶軸油，也適用于煉油廠、電廠、電站、變電所（室）及油庫輸油。稀油潤滑系統的稀油轉運。如：輸送無潤滑性的油料、飲料、低腐蝕性的水等，請選用整體不銹鋼齒輪泵，本廠均有生產。
WCB齒輪油泵性能參數
型號 | 流量 L/min | 輸送高度 （m） | 重量 （kg） | 驅動功率 （w） | 使用電源 防爆電機（v） | |
WCB-30B | 30 | 30 | 41 | 370 | 220/380 | 鑄造 |
WCB-50B | 50 | 30 | 43 | 550 | 220/380 | |
WCB-75B | 75 | 30 | 45 | 750 | 220/380 | |
用途 適用于輸送不含固體顆粒和纖維，無腐蝕性，溫度不高于80℃，粘度為5×10-6～1.5×10-3m2/s （5-1500cSt）的潤滑油或性質類似潤滑油的其他液體。應用范圍 在輸油系統中可用作傳輸、增壓泵；在燃油系統中可用作輸送、加壓、噴射的燃油泵；在一切工業領域中，均可作潤滑油泵用。
結構特點 本系列齒輪油泵主要有齒輪、軸、泵體、軸端密封所組成。齒輪經熱處理有較高的硬度和強度，與軸一同安裝在可更換的軸套內運轉。泵內全部零件的潤滑均在泵工作時利用輸出介質而自動達到。 泵內有設計合理的泄油和回油槽，是齒輪在工作中承受的扭矩力最小，因此軸承負荷小，磨損小，泵效率高。從主軸外伸端向泵看，為順時針旋轉。
CZW6300多功能強光頭燈
CZW6300多功能強光頭燈
一、概況CZW6300多功能強光頭燈適用于施工作業、檢修搶修、現場勘察、戶外探險提供的照明,并且還可以作信號聯絡和方位顯示之用。
二、性能特點1、節能：采用進口固態LED光源,光效高,壽命長達10萬小時。2、開關功能：智能控制弱光、強光、信號閃爍三種功能,自由切換。3、優化結構：人性化設計,能根據工作現場照明的需要上下調節角度可達180度。的抗沖擊材料,能抵抗惡劣的環境。4、方便實用：體積小,整燈重量不超過115克,可頭戴、用帽扣固定在頭盔上等,根據環境要求靈活使用。
三、主要技術參數1、額定電壓：3.6V2、額定容量：1800mAh3、光源功率：1W4、強光通量：60lm 弱光通量：30lm5、強光時間：8h 弱光時間：15h6、光源壽命：10萬h 電池壽命：約1000次循環7、充電時間：4.5 h8、外形尺寸：90x62x65MM9、重 量：115g
四、品質本產品嚴格按照ISO9001:2000國際質量管理體系標準進行質量控制,確保產品質量高于國家標準,達到設計要求,自購買之日起3年內,產品正常使用下出現任何故障由本公司負責免費維護。
TDS3012C/3014C無錫泰克TDS3012C/3014C數字存儲示波器
MAS830B深圳華儀MAS830B 數字萬用表
美孚格高30合成齒輪油美孚格高30/80循環合成齒輪油
Mobil Glygoyle 11,22, 30 have very high viscosity indices and, being wax-free, they have extremely low pour points. Their coefficients of friction ａnd traction (for example, in non-conforming gear or bearing contacts) are lower than for mineral oils. These exceptional lubricity characteristics help deliver lower operating temperatures in many applications.Mobil Glygoyle 11 ,22, ａnd 30 have provided outstanding performance in the most severe industrial applications for more than 25 years. They are recommended for use by major plastic calendar, paper machine bearing, compressor ａnd gear manufacturers, ａnd are the products of choice for many severe service applications.Features ａnd BenefitsThe Mobil Glygoyle brand of lubricants is recognised ａnd appreciated around the world for its innovation ａnd outstanding performance. The molecular designed polyalkyleneglycol synthetic products have been specially chosen for use in Mobil Glygoyle 11, 22, ａnd 30 ａnd demonstrate the continuing commitment to using advanced technology to provide outstanding product performance. A key factor in the development of Mobil Glygoyle 11, 22, ａnd 30 were the close contacts between our scientists ａnd application specialists with key OEMs to ensure that our product offerings will provide exceptional performance in the continually evolving industrial equipment designs.
Mobil Glygoyle products were primarily designed to meet the critical high temperature needs of a variety of industrial equipment where mineral-based ａnd other synthetic products were not able to perform satisfactorily. Additional features such as low friction ａnd traction, gas absorption properties resulted in even broader industrial application opportunities. Mobil Glygoyle 11, 22, ａnd 30 lubricants offer the following features ａnd potential benefits:
| Features | Advantages ａnd Potential Benefits |
| Superb thermal ａnd oxidative stability, ａnd resistance to sludge ａnd deposit formation | Extended lubricant life, increased production, less scheduled ａnd unscheduled downtime. |
| Lower maintenance costs ａnd replacement expenditures | |
| Low coefficients of traction ａnd friction | Reduced operating temperatures, greater equipment efficiency, ａnd potential for reduced power consumption ａnd long seal life. |
| Minimises effects of micro slip in rolling contact bearings for longer element life potential | |
| Very high thermal conductivity | Helps to lower operating temperature, increasing charge life. |
| Excellent low-temperature fluidity | Enables quicker warm-up at low ambient temperature resulting in reduced power consumption ａnd smoother running. |
| Reduced gear tooth wear at high temperatures for both steel-on-steel ａnd steel-on-bronze metallurgies | Reduced operating costs due to less wear, reduced operating temperature ａnd smoother running |
| Reduced absorption ａnd viscosity reduction with pressurised hydrocarbon gases | Improved film protection ａnd long life for natural gas compressors |
| Multipurpose industrial equipment capability | Potential to use fewer products with reduced inventory costs ａnd less chance for mis-lubrication |
Mobil Glygoyle lubricants are recommended for the most severe conditions in all types of plain ａnd anti-friction bearings ａnd industrial enclosed gears up to a bulk oil temperature of 200º C. Specific applications include:
- Severe plastic calendar operations
- High temperature paper machine bearings
- Industrial enclosed gears – spur, bevel ａnd worm gearing
- Reciprocating ａnd rotary air, natural gas, CO2 ａnd other process gasses
Application notesPolyalkyleneglycol (PAG) based lubricants have some inherent excellent lubrication properties imparted by the PAG base oil. However, PAG based lubricants do have limitations with respect to compatibility with seal ａnd coating materials, some varieties of light metal alloys ａnd other lubricants. Before applying any PAG lubricant, contact the original equipment manufacturer for specific advice on the application.
Compatibility with other lubricantsMobil Glygoyle 11, 22, ａnd 30 are not compatible with mineral oils ａnd most other synthetic lubricants. Additionally, depending on the specific type of PAG base fluid, they may not be compatible with other PAG type lubricants. (e. g. Mobil Glygoyle 11, 22, 30 ａnd Mobil Glygoyle ISO VG Series are not miscible)Mobil Glygoyle 11, 22, ａnd 30 are not generally recommended for use in systems previously filled with mineral oils or PAO based synthetic lubricants. It is further recommended to check compatibility when topping up or replacing existing PAG fillings with Mobil Glygoyle products, generally the preference is to avoid mixtures by draining, flushing ａnd refilling.When changing from mineral oil or other synthetic products to Mobil Glygoyle products, it is crtical to clean the system thoroughly ａnd flush with suitable fluids prior to conversion. For further details please contact your ExxonMobil representative.
WaterMobil Glygoyle 11, 22, ａnd 30, along with all PAG based lubricants, are hygroscopic ａnd absorb more water than mineral oils or synthetic hydrocarbons before. Therefore extra care should be taken not to expose PAG oils to excessive moisture. Due to their inherent high specific gravity, water does not ｄrop to the bottom of reservoirs, but stays on top of the lubricant.
Seal compatibilityPAG based lubricants are not compatible with most standard seal materials used for mineral oils or synthetic hydrocarbons. Incompatible materials are likely to shrink or swell, thus causing severe leakage or seizure of the seal. When converting from mineral oil or synthetic hydrocarbons to Mobil Glygoyle 11, 22, or 30, seal compatibility must be considered.. FKM ａnd VMQ are normally suitable for use with PAG. NBR materials may be used but have restricted temperature range. In all cases, operating conditions ａnd the variability of elastomer properties from different manufactures should be considered. For best results, consult the equipment supplier or seal manufacturer for specific recommendations.
Light Metal AlloysMobil Glygoyle 11, 22, ａnd 30 ａnd PAG lubricants are well suited for gear applications with ferrous ａnd most non ferrous materials. However, Mobil Glygoyle products ａnd PAG lubricants are not recommended for use with light metal alloys containing Aluminum or Magnesium. PAG lubricants can lead to increased wear when used with light metal alloys of this nature. Please consult the original equipment manufacturer for additional information.
Other MaterialsPaints, coatings, ａnd some plastics are not suitable for use with PAG lubricants. In general two component paints (reactive paints, epoxy resins) are suitable for use for interior coatings in contact with the lubricant. Otherwise, interiors in contact with the lubricant should be left uncoated. Materials used for oil level gages, inspection doors etc., should preferably be made of natural glass or polyamide materials. Other transparent plastics, e.g. Plexiglas, may deteriorate ａnd crack under stress.
Typical Properties| Mobil Glygoyle 11 | Mobil Glygoyle 22 | Mobil Glygoyle 30 | |
| Viscosity, ASTM D 445 | |||
| cSt @ 40ºC | 85 | 177 | 224 |
| cSt @ 100ºC | 11.5 | 25.1 | 30.9 |
| Pour Point, ASTM D 97, °C | -45 | -41 | -41 |
| Flash Point, ASTM D 92, °C | 226 | 229 | 221 |
| Specific Gravity at 20°C, ASTM D 1298 | 1.009 | 1.007 | 1.006 |
| Copper Strip Corrosion, ASTM D 130 100°C, 24 hours | 1B | 1B | 1B |
| Rust Protection, ASTM D 665 distilled water | Pass | Pass | Pass |
| Foam Tendency/Stability, ASTM D 892, ml Sequence 1 | 5/0 | 5/0 | 5/0 |
| Four Ball Wear, ASTM D 4172, mm Wear Scar Diameter | 0.4 | 0.4 | 0.4 |
| FZG Scuffing Test, ISO Fail Load Stage | 12+ | 12+ | 12+ |
UF6030CBA12H-L臺灣福佑UF6030CBA12H-L橫流風機402x100x90
橫流風機的動壓高，出口氣流速度達，氣流到達距離較遠，它的寬度可按需要選定，30kw柴油發電機公司備用
| | |||
| | |||
| | | ||
| | | | |
| | | | |
| | | | 水 冷 |
| | | | |
| | | | |
| | 靜音款（帶四輪） | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | 機械調速 |
| | | | |
| | | | |
| | 消聲器 | | 錐度軸剛性連接 |
| | |||
| | | | |
| | | ||
| | | ||
| | 480/550 | ||
| | | ||
| | |||
| | | | |
| | | | |
| | |||
| | | | |
| | | | |
| | |||
| | |||
| | |||
| | |||
| | |||
| | |||
| | |||
| | |||
| | |||
| | |||
| | |||
| | |||
| | |||
| | |||
