General DescriptionThe whole system consists of 3 standard 40” containers that can be normally transported by trucks or ship to the catastrophe region and connected in 30-40 hours in site for ready to produce the drinking water.The raw water used by the system can be seawater, brackish water or other dirty natural water.The system can be operated continuously, and produces from 600 m3 per day (standard version) to 1000 m3/day (enlarged version) drinking water with WHO’ quality.The system works with a “switch on and run” mode, the fully automatic operation means that skilled operator is not necessary .The system can be transported either by net power or by an emergency diesel generator at 380/400v, 50Hz AC with a total power consumption of 300kWh.2 Highlights of The System:The first container – the pre-treatment system of the raw water.The system features as:In view of the evil circumstance of the catastrophe region, mainly the traditional sand filtration technique is used as usual in this case. It is, however, possible to use the micro- or ultra-filtration techniques in the container if the customer wishes.To guarantee a smooth operation of the sand filter, an on-line self-washing guard filter has, before the sand filters, been installed. Therefore the system is widely applicable to various raw water, e.g. a heavy SS polluted sea water; A fully automatic PLC controller allows the system ”switch on and run” without a skilled operator; All pre-treatment equipments in the container such as the on-line self-washing guard filter, the sand filters, the air driven valves, air compressor and control cabinet are so installed and fixed firmly that it can be transported in a critical condition; All materials used for the sea water contact parts of the pre-treatment system are 316L stainless steel or PVC. All chemical dosing units are automatically operated and the storage tanks of the chemicals are reliably protected. The pre-treatment container has the size of 2590 x 12190 x 2440 (HWD : mm) as the standard 40”container. The inside of the container is air-conditioned during operation. The power requirement of the pre-treatment container is 45kWh.The total gross weight of the pre-treatment system including the container itself is 18500kg.The second container – the sea water desalination system and the concerned accessories.The system features as:5μsafe filter unit is used to prevent solids above 5μfrom entering the RO module. Dosing unit: Anti-scale, Hydrochloric acid, Reductant, Sodium hydroxide. All chemical dosing units are automatically operated and the storage tanks of the chemicals are reliably protected.The SWRO container is equipped with a set of high-pressure pump and a set of energy recovery system.Each parallel of membrane module is arranged as one passage, 8 pieces of pressure vessel are required, 6 membrane modules are installed in each of them. Automatic cleaning system and rinsing unit are also equipped in the container.Instrumentation: ORP, pH & conductivity sensors, flow meter, pressure gauge, sampling devices are suitably arranged on the RO system. Control : automatic controlled by PLC system. The container has the size of 2590 x 12190 x 2440 (HWD : mm) as the standard 40”container. The inside of the container is air-conditioned during operation. The power requirement of the pre-treatment container is 132kWh.The total gross weight of the SWRO system including the container is 18000kg.The third container – the Post- treatment system and the concerned accessories.The system features as:Backwashing tank with level control.Fresh water tank with level control.Circular disinfectant dosing unit is operated automatically to keep the produced water always safe and fresh. Circular pump unit. Control: automatically controlled by PLC unit. The container has the size of (HWD) 2590 x 12190 x 2440 (mm) as the standard 40”container. The inside of the container is air-conditioned during operation. The power consumption of the pre-treatment container is 5kWh.The total gross of the post-treatment system including the container is 35000kg. The carrying weight is 8000kg.Prefab Material used to connect the containers:PipesCablesThe optional parts:Automatic water output supplying systemA steady pressure output water supplying system is also available on requestAutomatic diesel power generatorAn auto diesel driven power generation system that can power this emergency drinking water producing system is also available and can be delivered on request.3 Basic Technical DataRaw water requirement:TSS＜100mg/l ,TDS＜40000mg/l ,COD＜8Mg/LProducing Water Quality:Produced water is equal to/higher than WHO’s drinking water standards.Drain Water: The brine amounting to 46m3/hr contains no harmful materials, therefore is allowed to drain directly into the open sea and diffused immediately, thus there is no any influence on the environmentPower Supply:Total required power is about 250Kwh, 380/400V, 50Hz.Foundation requirement:There is no particular requirement is needed to place this system. A sand or concrete based plat place on which the containers can firmly supported is enough.Size :All the three containers’ is the same size of (HWD) 2590 x 12190 x 2440 (mm) as the standard 40”container.4 On Site InstallationNo needs for building or time consuming civil works.One day for installation to connect containers through the prefab pipes and cables.5 Operation and MaintenanceTruly automatic controlled by PLC allows the system run in the “Switch on and run” mode, therefore there is no particular need for the specialist to operate this emergency drinking water producing system.The design of three-container type makes system maintaining easy and simple.Cleaning for RO support with our guidance. ambient temperature: 5-40℃Raw water temperature: 5-30℃6 TransportationWhole system consists of three standard containers therefore it can be easily transported as normal container by truck or ship. No special conditions are required.

日 本 YUKEN 油研生產是日本最大的專業液壓元件生產廠，具有50多年生產液壓元件經驗，其產品包括液壓泵、液壓閥、液壓馬達，液壓油缸、比例閥、液壓系統、液壓附屬配件和液壓回路設計等，產品廣泛應用于注塑成形機、油壓機、鋼鐵廠、機床、行走機械、液壓電梯和環保工廠等。

日本油研型號大全

日本油研50T、150T系列葉片泵50T-12-F-RL-30 50T-12-L-RL-30 50T-17-F-RL-30   50T-17-L-RL-3050T-23-F-RL-3050T-23-L-RL-3050T-26-F-RL-3050T-26-L-RL-3050T-36-F-RL-3050T-36-L-RL-3050T-7-L-RL-30150T-116-L-RL-40150T-48-L-RL-40150T-61-L-RL-40150T-75-L-RL-40150T-94-L-RL-40

YUKE日本油研PV2R1定量葉片泵PV2R1-10-F-RAA-41PV2R1-10-L-RAA-41PV2R1-10-L-RAA-41PV2R1-12-F-RAA-41PV2R1-12-L-RAA-40PV2R1-12-L-RAA-41PV2R1-12-L-RAA-41PV2R1-14-F-RAA-41PV2R1-14-L-RAA-41PV2R1-14-L-RAA-41PV2R1-17-F-RAA-41PV2R1-17-L-RAA-41PV2R1-17-L-RAA-41PV2R1-19-F-RAA-41PV2R1-19-L-RAA-40PV2R1-19-L-RAA-41PV2R1-19-L-RAA-41PV2R1-23-F-RAA-41PV2R1-23-F-RAA-4122PV2R1-23-L-RAA-41PV2R1-23-L-RAA-41PV2R1-23-L-RAA-4122PV2R1-25-F-RAA-41PV2R1-25-F-RAA-4122PV2R1-25-L-RAA-41PV2R1-25-L-RAA-41PV2R1-25-L-RAA-4122PV2R1-31-F-RAA-41PV2R1-31-F-RAA-4122PV2R1-31-L-RAA-41

日本油研柱塞泵A16-L-R-01-H-K-32A37-F-R-01-B-K-32A37-F-R-01-B-K-32A37-F-R-01-C-K-32A37-F-R-01-H-K-32A37-F-R-01-H-K-32A37-L-R-01-B-K-32A37-L-R-01-B-K-32A37-L-R-01-C-K-32A37-L-R-01-C-K-32A37-L-R-01-H-K-32A37-L-R-01-H-K-32A56-L-R-01-B-K-32A56-L-R-01-C-K-32A56-L-R-01-H-K-32A70-LR01CS-60A90-LR01CS-60A90-LR01HS-60A90-LR01KS-60AR16-FR01B-20AR16-FR01B-20AR16-FR01B-20-C1AR16-FR01C-20AR16-FR01C-20AR16-FR01C-20-C1 GY-A10V045DFR/52R-PKC62N00GY-A2F-107（FOOT）GY-A2F-160（FOOT）GY-A2F28R3Z4GY-A2F40R2P3GY-A2F45R2P3GY-A2F55L2P3GY-A2F55R2P3GY-A2F63L2P3GY-A2F63R2P3GY-A2F80L2P3GY-A2F80R2P3GY-A7V107LV2.O R PF00GY-A10V045DFR/52R-PKC62N00GY-A2F-107（FOOT）GY-A2F-160（FOOT）GY-A2F-23,28（FOOT）GY-A2F-40,45,55（FOOT）GY-A2F-63,80（FOOT）GY-A2F107L2P3GY-A2F107R2P3GY-A2F125R2P3GY-A2F12R2P4GY-A2F160R2P3

 

POLYCOLD冷凍機| Parylene真空沉積| 派瑞林真空敷膜

使用單位：北京大學生命科學院、中國運載火箭研究院、中國空間研究院、中科院遺傳與發育所、中科院林業研究所、南京中國醫科大學、山東大學生命科學院、北京大學第一附屬醫院、航天部23所、504所、山西太化集團、北京實力源、深圳森科五金、中國醫科院病毒所、中國石化勝利油田、陜西量子高科制藥集團、成都現代南光、深圳市龍華東田精密涂覆廠等。-135℃水汽捕集泵   -135℃ Water vapor cryopump（提供polycold冷媒及維修）水汽捕集泵 又稱：POLYCOLD、快速循環水汽深冷泵應用原理:    在使用油擴散泵的高真空環境中都存在著一定的殘余氣體，80%以上是水蒸汽、油蒸汽及其它高沸點的蒸汽，但其抽除殘余氣體的能力低，時間長，而且所有殘余氣體還是工件的污染源，從而使產品的產量和質量受到影響。深冷泵則是解決這類問題的上佳選擇。    深冷泵的工作原理：將一個能到-120℃以下的制冷盤管，放置在真空室中或油擴散泵的泵口，通過其表面的低溫冷凝效應，迅速捕集真空系統的殘余氣體。從而大大縮短抽真空的時間（可縮短60-90%的抽氣時間）、獲得潔凈的真空環境（真空度可提高半個數量級，達到10-8 Torr、10-5 Pa）。在實際應用當中，根據所放的位置不同可以分為兩類（見圖）：1、水汽捕集器    它的制冷盤管經常被安裝在高閥與真空腔之間或真空腔內、卷繞鍍膜上下室內等部位。適用于塑料低溫鍍膜、卷繞鍍膜等被鍍膜材料放氣量較大的場合。盤管需要有加熱除霜裝置，使盤管每次開門之前恢復到常溫，避免低溫盤管從大氣中吸收大量的水汽而結霜，影響下次抽真空。  2、低溫冷阱    放在油擴散泵的泵口，高閥以下，它主要功能是防止油擴散泵返油，同時也可以加快抽速、提高真空度。由于系統處于真空狀態，無需除霜裝置。根據需要,二者可以分別安裝也可以同時安裝.  北京天地精儀公司研發生產的-145℃深冷水汽捕集泵，采用單臺壓縮機、自動復疊制冷方式、進口名牌壓縮機及制冷配件、環?；旌闲椭评鋭┥a(chǎn)，替代液氮，節約成本。具有制冷速度快、效率高、溫度低、維護方便等特點，其性能指標在國內處于領先地位，達到甚至超過國際先進水平。  主要的性能特點 1、快速吸附水、油蒸汽、可縮短排氣時間60-90%；2、降溫迅速，3分鐘內制冷到-120℃，最低可到-150℃； 3、2分鐘熱氣除霜，迅速回溫，5分鐘可再降溫; 4、一臺設備可設計兩路負載輸出； 5、進口壓縮機，環?；旌闲椭评鋭?6、完善的自動化控制；7、具有兩路負載入口和出口溫度顯示、本機溫  度顯示；8、當待機溫度到達后有指示燈提示，可以開始制冷；9、除霜溫度自由設定； 10、具有水溫溫度、排氣溫度顯示； 11、缺水、水溫過高報警；   12、壓縮機排氣過高、壓力過高保護； 13、電源斷電、缺相報警； 14、可本地、遠程控制自由轉換； 15、R232計算機數據接口，計算機可讀取溫度數據及控制。 技術參數：型號：TH-145-5P，壓縮機功率：4.6KW，工作溫度：-120至-150度，抽氣速度：51000L/s，制冷量：500，冷凝管面積：0.2m2,冷凝管長度：6m直徑12mm,預冷時間：小于等于30min，降溫時間：小于等于3min,除霜時間：小于等于3min，再降溫時間：小于等于3min，適用油擴散泵徑：小于等于500mm，冷卻方式：水冷（t小于等于20度）型號：TH-145-7P，壓縮機功率：6.3KW，工作溫度：-120至-150度，抽氣速度：73000L/s，制冷量1200，冷凝管面積：0.5m2,冷凝管長度：12m直徑12mm,預冷時間：小于等于30min，降溫時間：小于等于3min,除霜時間：小于等于3min，再降溫時間：小于等于3min，適用油擴散泵徑：小于等于800mm，冷卻方式：水冷（t小于等于20度）型號：TH-145-10P，壓縮機功率：8.5KW，工作溫度：-120至-150度，抽氣速度：101000L/s，制冷量：1800，冷凝管面積：0.7m2,冷凝管長度：14m直徑16mm,預冷時間：小于等于30min，降溫時間：小于等于3min,除霜時間：小于等于3min，再降溫時間：小于等于3min，適用油擴散泵徑：小于等于1000mm，冷卻方式：水冷（t小于等于20度）型號：TH-145-12P，壓縮機功率：10.1KW，工作溫度：-120至-150度，抽氣速度：153000L/s，制冷量：：2500，冷凝管面積：0.9m2,冷凝管長度：18m直徑16mm,預冷時間：小于等于40min，降溫時間：小于等于4min,除霜時間：小于等于3min，再降溫時間：小于等于6min，適用油擴散泵徑：雙路輸出，冷卻方式：水冷（t小于等于20度）型號：TH-145-12P，壓縮機功率：12.3W，工作溫度：-120至-150度，抽氣速度：250000L/s，制冷量：：3500，冷凝管面積：1.5m2,冷凝管長度：30m直徑16mm,預冷時間：小于等于40min，降溫時間：小于等于5min,除霜時間：小于等于3min，再降溫時間：小于等于6min，適用油擴散泵徑：雙路輸出，冷卻方式：水冷（t小于等于20度） 

POLYCOLD冷凍機| Parylene真空沉積| 派瑞林真空敷膜POLYCOLD冷凍機| Parylene真空沉積| 派瑞林真空敷膜

 

 

 

 

聯系方式：13965983616產品介紹      一：產品特點及用途

本產品適用于交流U0/U為300/500V電力、冶金、石化等行業以電子計算機為主的自動控制系統、計算機集散控制系統、自動化控制系統作控制線以及檢測用儀器儀表用電子計算機電纜。

二：產品執行標準

Q/TK08-2012（等效采用英國BS5308標準）

阻燃性能試驗執行GB12666-90標準

三：使用特性

1．   交流額定電壓：U0/U 300/500KV

2．   最高工作溫度：聚乙烯絕緣不超過70℃

                  交聯聚乙烯絕緣90℃

              低煙無鹵阻燃聚烯烴70℃

              低煙無鹵阻燃交聯聚烯烴90℃和125℃兩種

3．   最低環境溫度：聚氯乙烯護套：固定敷設-40℃，非固定敷設-15℃

4．   電纜安裝敷設溫度應不低于0℃。

5．   電纜允許彎曲半徑：非鎧裝電纜最小為電纜外徑的6倍

銅帶屏蔽或鋼帶鎧裝電纜最小為電纜外徑的12倍

四：基本型號及名稱

1．聚乙烯絕緣聚氯乙烯護套計算機用屏蔽電纜（包括DCS電纜）

DJYV（R）P 聚乙烯絕緣銅絲編織總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYPV（R） 聚乙烯絕緣銅絲編織分屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYPV（R）P 聚乙烯絕緣銅絲編織分屏總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYV（R）P2 聚乙烯絕緣銅帶繞包總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYP2V（R） 聚乙烯絕緣銅帶繞包分屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYP2V（R）P2 聚乙烯絕緣銅帶繞包分屏總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYV（R）P3 聚乙烯絕緣鋁塑復合帶繞包總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYP3V（R） 聚乙烯絕緣鋁塑復合帶繞包分屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYP3V（R）P3 聚乙烯絕緣鋁塑復合帶繞包分屏總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYVP（R）22 聚乙烯絕緣銅絲編織總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYP（R）V22 聚乙烯絕緣銅絲編織分屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYPV（R）P22 聚乙烯絕緣銅絲編織分屏總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYV（R）P2-22 聚乙烯絕緣銅帶繞包總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYP2V（R）22 聚乙烯絕緣銅帶繞包分屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYP2V（R）P2-22 聚乙烯絕緣銅帶繞包分屏總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYVP3（R）-22 聚乙烯絕緣鋁塑復合帶繞包總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYP3V（R）22 聚乙烯絕緣鋁塑復合帶繞包分屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYP3V（R）P3-22 聚乙烯絕緣鋁塑復合帶繞包分屏總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 阻燃計算機電纜在型號前加ZR，屏蔽可采用鍍錫銅絲，基本型號略 

2．聚氯乙烯絕緣聚氯乙烯護套計算機用屏蔽電纜（包括DCS電纜）

DJVV（R）P 聚氯乙烯絕緣銅絲編織總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJVPV（R） 聚氯乙烯絕緣銅絲編織分屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJVPV（R）P 聚氯乙烯絕緣銅絲編織分屏總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJVV（R）P2 聚氯乙烯絕緣銅帶繞包總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJVP2V（R） 聚氯乙烯絕緣銅帶繞包分屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJVP2V（R）P2 聚氯乙烯絕緣銅帶繞包分屏總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJVV（R）P3 聚氯乙烯絕緣鋁塑復合帶繞包總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJVP3V（R） 聚氯乙烯絕緣鋁塑復合帶繞包分屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJVP3V（R）P3 聚氯乙烯絕緣鋁塑復合帶繞包分屏總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJVV（R）P22 聚氯乙烯絕緣銅絲編織總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJVPV（R）22 聚氯乙烯絕緣銅絲編織分屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJVPV（R）P22 聚氯乙烯絕緣銅絲編織分屏總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJVV（R）P2-22 聚氯乙烯絕緣銅帶繞包總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJVP2V（R）22 聚氯乙烯絕緣銅帶繞包分屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJVP2V（R）P2-22 聚氯乙烯絕緣銅帶繞包分屏總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJVV（R）P3-22 聚氯乙烯絕緣鋁塑復合帶繞包總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJVP3V（R）22 聚氯乙烯絕緣鋁塑復合帶繞包分屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJVP3V（R）P3-22 聚氯乙烯絕緣鋁塑復合帶繞包分屏總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 阻燃計算機電纜在型號前加ZR，屏蔽可采用鍍錫銅絲，基本型號略 

3．交聯聚乙烯絕緣聚氯乙烯護套計算機用屏蔽電纜（包括DCS電纜）

DJYJV（R）P 交聯聚乙烯絕緣銅絲編織總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYJPV（R） 交聯聚乙烯絕緣銅絲編織分屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYJPV（R）P 交聯聚乙烯絕緣銅絲編織分屏總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYJV（R）P2 交聯聚乙烯絕緣銅帶繞包總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYJP2V（R） 交聯聚乙烯絕緣銅帶繞包分屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYJP2V（R）P2 交聯聚乙烯絕緣銅帶繞包分屏總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYJV（R）P3 交聯聚乙烯絕緣鋁塑復合帶繞包總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYJP3V（R） 交聯聚乙烯絕緣鋁塑復合帶繞包分屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYJP3V（R）P3 交聯聚乙烯絕緣鋁塑復合帶繞包分屏總屏聚氯乙烯護套計算機用屏蔽（軟）電纜 DJYJV（R）P22 交聯聚乙烯絕緣銅絲編織總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYJPV（R）22 交聯聚乙烯絕緣銅絲編織分屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYJPV（R）P22 交聯聚乙烯絕緣銅絲編織分屏總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYJV（R）P2-22 交聯聚乙烯絕緣銅帶繞包總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYJP2V（R）22 交聯聚乙烯絕緣銅帶繞包分屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYJP2V（R）P2-22 交聯聚乙烯絕緣銅帶繞包分屏總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYJV（R）P3-22 交聯聚乙烯絕緣鋁塑復合帶繞包總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYJP3V（R）22 交聯聚乙烯絕緣鋁塑復合帶繞包分屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 DJYJP3V（R）P3-22 交聯交聯聚乙烯絕緣鋁塑復合帶繞包分屏總屏聚氯乙烯護套鋼帶鎧裝計算機用屏蔽（軟）電纜 阻燃計算機電纜在型號前加ZR，屏蔽可采用鍍錫銅絲，基本型號略  

 

－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－  

 干濕法圖像分析儀應用領域

集成了真空分散技術廣泛應用：粒度、粒形、顏色、顆粒計數等分析

干濕法粒度粒形分析儀參數規格

粒徑范圍 (干法模式)	0.2-3000μm
粒徑范圍 (濕法)	0.8—300μm
反射光	高分辨率聚焦裝置（1000萬像素相機+特殊LED光源）
粉體樣品分散（干法）	集成真空分散裝置
樣品流動 (濕法)	集成注射泵
玻璃板尺寸	200 x 200 mm

TY710 、TY720數字萬用表：

●的精度基本精度0.020％，真值測量●新功能的電子和工業用，同時測量和顯示的直流和AC切換值/平均值檢測※低通濾波器（LPF）※AC50mV范圍※羅功率電阻測量（TY720）●支持?jǐn)?shù)據管理大容量日志記錄模式內存TY720：10,000數據TY710：1,000數據USB通信，應用軟件（可選數字萬用表交流包）●安全設計和寬溫度范圍使用的嚴酷對符合安全標準EN61010 - 11000V酷刑。Ⅲ，600V的貓。Ⅳ防止錯誤插入測試安全快門導致到目前測量終端工作溫度范圍-20到+55℃存儲溫度范圍-40到+70℃●封閉案例校準，3年保修

參數對比；

DCV	0.02% + 5,	0.02% + 5	50.000 mV to 1000.0 V
ACV:RMS	0.7% + 30,	0.4% + 30,	50.000 mV to 1000.0 V
ACV:MEAN	n/a,	1.0% + 30,	50.000 mV to 1000.0 V
DCV+ACV	1.0% + 10,	0.5% + 10,	5.000 V to 1000 V
DCA	0.2% + 2,	0.2% + 2,	500.00 μA to 10.000 A
ACA:RMS	1.0% + 10,	0.75% + 20,	500.00 μA to 10.000 A
ACA:MEAN	n/a,	1.5% + 20,	500.00 μA to 10.000 A
DCA+ACA	1.5% + 10,	1.0% + 10,	500.00 μA to 10.000 A
Continuity Check	Buzzer Sounds at 100 ± 50 Ω or less, Range:500.0 Ω
Resistance	0.1% + 2,	0.05% + 2,	500.00 Ω to 50.000 MΩ
LOW-power Resistance	n/a,	0.2% + 3,	5.000 kΩ to 5.000 M
Diode Test	1.0% + 2,	1.0% + 2,	2.4000 V
Temp.※	1.0% + 1.5 deg.C,	1.0% + 1.5 deg.C,	-200 to 1372℃
Capacitance	1.0% + 5,	1.0% + 5,	5.000 nF to 50.00 mF
Frequency	0.02% + 1,	0.02% + 1,	2.000 Hz to 99.99 kHz
Duty Cycle	±1%,	±1%,	10 to 90%

在線咨詢：1973687      916780778 

 SIRCOVER 125A 　 

1.測風范圍：	0~40m/s 精確度：±（0.5+0.05V）m/s
2.風速顯示：	三秒鐘的連續平均風速，分辨率為0.1m/s
3.起動風速：	≤1.5m/s
4.預警報范圍：	2m/s~40m/s，任意設置。
5.警報范圍：	2m/s~40m/s，任意設置。
6.電源：	AC220*（1±10%）V  50Hz
7.遙測距離：	20m （最長可傳輸100m，用戶自行選用）

＞板載GX1-300 處理器, 低功耗,高性能＞板載LynxEM+SM712顯示芯片＞支持CRT及常用DSTN/TFT LCD屏＞集成網絡接口及音頻接口＞支持CompactFlashTM卡及DiskOnChipTM電子盤＞提供4個串口＞提供看門狗功能

性能參數:

系統:結構:標準3.5″單板結構芯片組:NS CS5530A處理器:NS GX1-300 (GX1-233 optional)前端總線頻率:100/133MHz系統內存:提供1個SODIMM可擴展到 256MBBIOS:2M Award Flash BIOS,即插即用看門狗功能:63級可編程，1秒～63秒硬件監控:監測電壓、溫度EMI設計:串口,并口,VGA口和PS/2鍵盤/鼠標接口防EMI設計總線擴展:提供1個PC/104擴展槽I/O接口:IDE接口:1個IDE44接口，可支持2個增強型IDE設備固態電子盤:提供1個CompactFlashTM卡座,最大容量達1GB，支持1個DiskOnChipTM2000電子盤,可達288MB 軟驅接口:支持2個FDD設備串口:COM1,COM3,COM4：RS-232模式,COM2：RS-232/422/485模式并口:1個并口,支持SSP/ECP/EPP模式USB接口:2個USB1.1接口PS/2接口:提供PS/2鍵盤/鼠標接口紅外接口:提供1個IrDA接口音頻接口:AC’97 帶 CD-IN 接口網絡:網絡接口:集成1個Realtek RTL8139D 10/100M以太網控制器, RJ-45接口;帶LED指示燈顯示:芯片:LynxEM+SM712顯存:集成顯存2/4MB可選分辨率:CRT模式:最大1280×1024@16bpp;LCD模式:支持TFT/DSTN,最大1280×1024@16bpp 顯示接口:CRT/LCD顯示