中文名稱 | 人硒蛋白1(SEP1)elisa測定試劑盒 | ||
英文簡稱 | SEP1 ELISA Kit | ||
ELISA試劑盒價格 | 面議 | 種屬 | 人 |
產品規格 | 96T/Kit (8*12 strips) 48T/Kit (8*6 strips) | ||
檢測方法 | 雙抗夾心法、間接法 | ||
樣本類型 | 體液、血清、血漿、細胞培養上清液、尿液、組織勻漿、心房水標本等等 | ||
使用范圍 | 僅限科研使用,不能應用于臨床 | ||
保存與運輸 | 保存與運輸 |
注:48T可以檢測37個樣本,10個標準品孔,1個空白。
96T標準的可以檢測85個樣本,10個標準品孔,1個空白。
科研ELISA試劑盒實驗在實際操作中,除了選擇優良試劑外,必須嚴格按照人硒蛋白1(SEP1)elisa測定試劑盒說明書操作步驟進行操作,同時作好室內質控、室間質評,以嚴謹?shù)墓ぷ髯黠L(fēng)檢測每一份標本,才能保證檢測質量,F(xiàn)在國內已有相當數量的單位擁有全自動酶標儀,這對于實現ELISA標準化檢測、提高檢測質量起到了積極重要的作用。
中文名稱 | 英文名稱 | 規格 | 保存 |
ELISA酶標板(可拆卸) | Micro ELISA Plate(Dismountable) | 96T/48T | 4℃/-20℃ # |
凍干標準品 | Reference Standard | 2/1 支 | 4℃/-20℃ # |
標準品&樣品稀釋液 | Reference Standard & Sample Diluent | 1瓶 20mL/12mL | 4℃ |
濃縮生物素化抗體 | Concentrated Biotinylated Detection Ab | 1支 120μL/70μL | 4℃ |
生物素化抗體稀釋液 | Biotinytated Detection Ab Diluent | 1瓶 10mL/6mL | 4℃ |
濃縮HRP酶結合物 | Concentrated HRP Conjugate | 1支 120μL/70μL | 4℃(避光) |
酶結合物稀釋液 | HRP Conjugate Diluent | 1瓶 10mL/6mL | 4℃ |
濃縮洗滌液(25×) | Concentrated Wash Buffer (25×) | Concentrated Wash Buffer (25×) | 4℃ |
底物溶液(TMB) | Substrate Reagent | 1瓶 10mL/6mL | 4℃(避光) |
反應終止液 | Stop Solution | 1瓶 10mL/6mL | 4℃ |
封板覆膜 | Plate Sealer | 2 張 |
|
產品說明書 | Product Description | 1 份 |
|
特別說明: *: [96T/48T](打開包裝后請及時檢查所有物品是否齊全完整) #: 一周內使用可存于4℃,需長時間存放或多次使用建議存于-20℃. |
人硒蛋白1(SEP1)elisa測定試劑盒操作步驟:
1.包被:用0.05MPH9.牰碳酸鹽包被緩沖液將抗體稀釋至蛋白質含量為1~10μg/ml。在每個聚苯乙烯板的反應孔中加0.1ml,4℃ 過一夜。次日,棄去孔內溶液,用洗滌緩沖液洗3次,每次3分鐘。(簡稱洗滌,下同)。
2.加樣:加一定稀釋的待檢樣品0.1ml于上述已包被之反應孔中,置37℃ 孵育1小時。然后洗滌。(同時做空白孔,陰性對照孔及陽性對照孔)。
3.加酶標抗體:于各反應孔中,加入新鮮稀釋的酶標抗體(經滴定后的稀釋度)0.1ml。37℃ 孵育0.5~1小時,洗滌。
4.加底物液顯色:于各反應孔中加入臨時配制的TMB底物溶液0.1ml,37℃ 10~30分鐘。
5.終止反應:于各反應孔中加入2M硫酸0.05ml。
6.結果判定:可于白色背景上,直接用肉眼觀察結果:反應孔內顏色越深,陽性程度越強,陰性反應為無色或極淺,依據所呈顏色的深淺,以“+”、“-”號表示。也可測OD值:在ELISA檢測儀上,于450nm(若以ABTS顯色,則410nm)處,以空白對照孔調零后測各孔OD值,若大于規定的陰性對照OD值的2.1倍,即為陽性。
人硒蛋白1(SEP1)elisa測定試劑盒上海潤裕生物科技有限公司針對不同行業的需求,我司不斷完善、更新技術和方法。在實驗室應用的比較廣泛,被業內眾多的科研人士認可和推廣。公司以優質,齊全的產品和優質的技術團隊得到了國家各大實驗高校及科研單位的認可和贊譽,擁有很好的知名度和口碑。如需要更多科研ELISA試劑盒說明書及報價等相關信息,請來電咨詢。武漢順利德機械設備有限公司是一家專業從事進口電子、液壓產品貿易及設計、制造各種非標液壓系統的高新技術企業,經過不懈努力,公司已與眾多國內外知名電子液壓元件供應商建立了密切的合作關系,從而為我們銷售品牌的質量,價格貨期提供了有力。
歡迎新老客戶來電詢價,我司將提供的產品、價格和貨期,良好專業的售前、售中和售后服務,令我們的合作更具保障!HQ-014HQ-024HR-014DH1-0713/X24DCHG-031/210/VAGAM-10/10/210V-1X24DCMAP-160map-320AGISR-10/210/VKG-033/210DH-0143-50DHU-0713PDHU-0714DHU--0630/2/A18AGMZO-A-10/100AGMZO-A-10/210RZGO-A-010/100 20DHI-0713DHI-0713P/23DHI-0631/2/23DHI-0639/0/23HR-012/50HMP-014-210-21 AGIU-20/10/100-X24DC 包含DHI-0639/0/23HR-012HMP-014/210DLOH-3A-U 20 DLOH-3C-U 20HQ-022/52 RZGO-A-010/100E-M1-AC-01F11/1E-ME-AC-01F/2E-MI-AC-01F/2DK-1141
QV-06/11 DHRZO-P5E-012/25/R DPZO-AE-373-L5 PFE-31016-1DT DLHZO-TE-040-L33-40 DLHZO-TE-040-L73/I DLHZO-TE-040-L73-40 RZGO-TERS-PS-010/100/I RZGO-TERS-PS-033/210/I MAP-080/E20 PFG-142-DX DHE-2/0631-23 DLOH-2C/220/50AC MAP-160/E 220AC AGAM-10/10/350-V DH-0151-50 AQFR-25 ARE-15/75 DPZO-AE-271-S5/E1+SP-ZH-7P DHI-0713/2-X24DC AGAM-10/10/210 map-320/20 E-MI-AC-01F E-ATR-7/160 PFE-31044-1DT DHZO-T-071-L3 DC24V AGRZO-A-10/100 RZMO-P1-010/100-20 DKZO-R-A-171-D5 PFE-31022 DKE-1613/AFC 24DC PFE-42070 SP-CO1-230/50/60/80 E-MI-AC-01F/RR DKZOR-AE-171-S5 PFE-51150/IDT(21MPd) PFG-327/D 327-D-RO PFE-41056/DT/WG SP-COU-24DC/80 DE6P-20-227-WD24AL-05 RZMO-A-030/210 40 SP-CAU-24DC/80 PFE-31028-1DT PFE-41037/016 PFED-43045/016-1DV020 SP-COU-220DC DLOH-3A/WP-UX-220DC SP-667 / 220 E-MI-AC-01F 20/3 PFE-51110/IDT E-ATR-6/160 E-ATR-6/250/I現型號為E-ATR-7/250/I E-BM-AC-01F AGRCZO-AE-020/210/I AGRCZO-A-020/210/I AGRCZO-AE-20/210/I MAP-160/20 RZGO-TERS-PS-010/210 40 KZGO-A-031/210 AGMZO-A-10/210-20 RZMO-TERS-PS-010/210 SP-COUR-220DC
atos單向電磁閥ADR-06/4 ADR-10ADR-15ADR-20/2ADR-25ADR-32ADRL-10ADRL-32
atos阿托斯溢流閥AGAM-10/10/100/V-IN24DC WG AGAM-10/10/210-IN230ACAGAM-10/10/210-IN24DCAGAM-10/10/350-IN24DCAGAM-10/100AGAM-10/11/210-1X24DCAGAM-10/11/350AGAM-10/20/350/100/350-24DCAGAM-10/20/350/100-IX24DCAGAM-10/210AGAM-10/210/VAGAM-10/22/210/100-IN230ACAGAM-10/350AGAM-10/50AGAM-20/10/210AGAM-20/10/210-IX24DCAGAM-20/10/350/VAGAM-20/11/210-N24DCAGAM-20/11/350-IN24DCAGAM-20/11/50AGAM-20/210AGAM-20/210/VAGAM-20/22/210-IX230ACAGAM-32/210AGIR-10/100AGIR-10/210AGIR-10/210/VAGIR-10/350AGIR-20/210AGISR-20/210VAGIU-20/10/100/D/V-IN24DC WG
atos先導溢流閥AGMZO-A-010/100AGMZO-A-010/210AGMZO-TERS-PS-010/210/IAGMZO-TERS-PS-10/210AGMZO-TERS-PS-10/210/IAGMZO-TERS-PS-10/210/IAGMZO-TERS-PS-32/315AGRCZ-A-020/100AGRCZO-A-010/100AGRCZO-A-010/100/PAGRCZO-A-010/315AGRCZO-A-10/210AGRCZO-A-20/210/RAGRCZO-AE-20/210/PAGRL-10-2AGRL-20/2AGRLE-10AGRLE-20AQFR-10ARAM-20/10/210-IN24DCARAM-20/210
atos單向閥ARE-06/350ARE-06/50ARE-06/500/VARE-15/15/44ARE-15/50/VARE-15/75C-14128 CK-25/12*100-Z308-23CK-32/14*0280-D901CK-32/22*0250-L002D1Y1AWCK-32/22*0250-L002D1Y1AWCK-40/18*0182-D901CK-40/28*160-D001ACK50/36*0200-E001CK-63/36 X 0265-C601-30DB-10/GDB-5/G
atos手動閥DH-0113DH-0143DH-014450DH-0151DH-0431/2DH-0914DK-1111DK-1113DK-1141DP-2113DP-2513DP-3113
atos防爆閥DHA/UL-0611/A/NPT 24DCDHA/UL-0631/2/A/NPT 24DCDHA/UL-0631/2/NPT 24DCDHA/UL-0713/NPT 24DCDHA-0611/A/NPT 24DCDHA-0630/2/PA-GKDHA-0631/2/7NPTDHA-0631/2/A/NPT 24DCDHA-0631/2/NPT 24DCDHA-0631/2-1/2NPTDHA-0711/GKDHA-0713/NPT 24DCDHA-0713/PA-GK 24DCDHA-0713P/PA-GK-24DCDHA-1711/2/NPT 24DC
阿托斯電磁閥DHI-0610-L3/15DHI-0610-X24DCDHI-0611DHI-0614-X230ACDHI-0630/2DHI-0631/2- N230ACDHI-0631/2/A-N24DCDHI-0632/2 24DCDHI-0632/2-N24DCDHI-0639/0 X24DCDHI-0701/2DHI-0711-N230ACDHI-0713/P X24DCDHI-0713-N24DCDHI-0713PDHI-0713P-N24DCDHI-0714DHI-0714/WP-N24DCDHI-0714/WP-X230AC/PEDHI-0715/2 23DHI-0716-X24DCDHI-0717-N24DCDHI-0718DHI-0751/2 FI/NC-24DCDHI-0751/2/WP-N230ACDHI-0751/2-X24DC(+帶燈插頭)DHI-0751-N24DCDHO-0631/2-N24DCDHO-0710-N24DCDHO-0713/WP-X24DC(+帶燈插頭)DHO-0713-N24DCDHPHA-1713/PA-CG-24DCDHQ-016/C/24 V-IX24DC/WGDHRZO-P5-021/25DHU-0610/A-X24DC (+帶燈插頭)DHU-0610-X24DCDHU-0611-X24DCDHU-0614-X24DCDHU-0630/2DHU-0631/2DHU-0631/2/FCDHU-0631/2/FCDHU-0631/2/PEDHU-0631/2-SP-667-24DCDHU-0631/2-X24DCDHU-0671DHU-0710 X24DCDHU-0711/WP-X24DC (+帶燈插頭)DHU-0713 X24DCDHU-0713/WP-X24DC (+帶燈插頭)DHU-0714-X24DCDHU-0751/2-SP667 24DC
阿托斯比例換向閥DHZ0-A-051-S5DHZO-A-051-L5/BDHZO-A-071-L1/20DHZO-A-071-L3DHZO-A-073-L5DHZO-A-073-S5DHZO-AE-073-S5DHZOR-A-171 S5DHZO-TE-071-L5DHZO-TF-071-S5
atos電磁換向閥DKE-1630/2 X24DCDKE-1630/2/L/WP-N24DCDKE-1630/2/WP-N24DCDKE-1630/2-N24DCDKE-1631/2/A-N24DCDKE-1631/2-N24DCDKE-1710/2DKE-1710-X24DCDKE-1711 230VDKE-1711-N110ACDKE-1711-N24DCDKE-1713/L/WP-N24DCDKE-1713/WP-N24DCDKE-1713-N24DCDKE-1713-X230ACDKE-1714-N24DCDKE-1751DKE-1751/2/WP-N220DCDKE-1751/2-SP667 24DCDKER-1611-N24DCDKER-1631/2-X24DCDKER-1713-N24DCDKI-1713-N230ACDKQ-016/O/24DKQ-016/O/24/KDKU-1611/FC-X 24DCDKU-1611-X24DCDKU-1630/2DKU-1631/2-X24DC (+帶燈插頭)DKU-1671DKU-1714/3 24VDKU-1714/8 24V
阿托斯比例換向閥DKZOR-A-151-L5DKZOR-A-151-S5/BDKZOR-A-171-L5DKZOR-A-171-S5/13DKZOR-A-173-L5DKZOR-A-173-S5DKZOR-AE-171-L5DKZOR-AE-171-S5DKZOR-AE-171-S5/YDKZOR-AE-173-L5/IDKZOR-AE-173-S5DKZOR-T-173-S5DLHZO-T-040-L73DLHZO-TE-040-L53DLHZO-TE-040-L53/IDLHZO-TE-040-L71DLHZO-TE-040-L71/ZDLHZO-TE-040-L73/B+SP-ZN-7PDLHZO-TES-PS-040-L51/1FDLHZO-TES-PS-040-L51/I/FDLHZO-TES-PS-140-L71/2FDLKZOR-T-140-L71DLKZOR-TE-140-L71DLKZOR-TE-140-L73/B+SP-ZN-7PDLKZOR-TES-PS-140-L71/I/FDLKZOR-TES-PS-140-L73/Q
atos電磁球閥DLOH-2C/-U-20DLOH-2C/WP-U24DCDLOH-2C-UX24DCDLOH-3A-UN230ACDLOH-3C DC24VDLOH-3C/PA-GK-AO 24DCDLOH-3C/S-UN24DCDLOH-3C/WP-UX24DC(+帶燈插頭)DLOH-3C-UN230RCDLOH-3C-UN24DC
atos電液換向閥DPH1-27193/H/S/WP-SP667-24DCDPHI-1611/A/X24DCDPHI-1713-24DC(+帶燈插頭)DPHI-2631/2-N24DCDPHI-2711/DDPHI-2711-N24DCDPHI-2713/D-N230ACDPHI-2713/H-N24DCDPHI-2713-N24DCDPHI-27193/H/S/WP-X24DCDPHI-3711DPHI-3711/DDPHI-3751-N24DCDPHO-2713-N24DCDPHO-3713-N24DCDPHU-2631/2/D/S-X24DCDPHU-3751/2-SP667 24DC
伺服比例閥 DPZ0-AE-373-S5/IDPZO-A-171-L5/D/GDPZO-A-271-D5/GDPZO-A-271-S5DPZO-A-273-D5DPZO-A-273-S5/DDPZO-A-371-L5/D/GDPZO-A-371-S5DPZO-A-371-S5/DDPZO-A-373-D5/FDPZO-A-373-L5/DDPZO-AE-271-S5DPZO-AE-273-S5DPZO-AE-373-S5DPZO-LE-270-L5/D/PEDPZO-T-171-S5DPZO-T-273-L5/EDR-5/G
阿托斯壓力傳感器壓力開關E-ATR-6/100E-ATR-6/160E-ATR-6/250E-ATR-6/250/IE-ATR-6/400E-ATR-6/400/IE-ATR-6/60E-ATR-6-100/IE-ATR-6-250/I
阿托斯放大器放大板E-BM-AC-01FE-BM-AC-05FE-BM-AC-05F/2E-EM-AC-01FE-K-11B (E-YC)E-K-32ME-ME-AC-01F E-ME-AC-01F/2E-ME-AC-01F/IE-ME-AC-01F/RR-4E-ME-AC-05F E-ME-AC-05F/RR4E-ME-AC-O5F/3E-ME-K-PIDE-ME-L-01H/140/DL27SBE-ME-T-01H/DH04SAE-ME-T-05HE-MI-AC-O1FE-RI-AE-05F/IE-RI-TE-01H
阿托斯疊加閥HC-011/30HC-034/100HG-031/210HG-031/32HG-031/50HG-033/100HG-033/50HG-033/75HG-034/210/ V/WGHG-034/210VHM-011/210HM-013/210/VHM-015/210HM-031/210HMP-011/100HMP-011/210/21HMP-011/350HMP-012/100HMP-012/210HMP-012/350HMP-012/350/VHMP-013/350HMP-015/100HMP-015/210HQ-012HQ-012/GHQ-013HQ-014HQ-022HQ-022/GHQ-023HR-004/8/30HR-011HR-011/4HR-011/8HR-012HR-012/2HR-012/4HR-013HR-014/4HR-016HR-031/2HS-011/210HS-011/32HZGO-A-031/100JO-DL-6-2/NCJPC-211JPC-211/30JPG-211/100/VJPG-211/210JPG-233/210JPQ-212JPQ-212/2JPQ-222JPQ-312JPR-212JPR-213/2JPR-312JPR-312/2KC-011KC-011/30KG-031/100KG-031/210KG-033/100KG-033/210"KM-011/350/50KM-014/350/30"KM-012/350KM-013/210KM-014/210KM-014/350/30KM-015/210KQ-012KQ-012/GKQ-013KQ-014KQ-022KQ-023KR-003KR-004KR-012KR-012/2KR-013KR-013/2KR-014KR-014/4KR-016
阿托斯插裝蓋板LIDD-3 NG16LIDEW1-2-1*24DC/WGLIDEW1-3-1N24DCLIMZO-A-1/210LIMZO-A-2/210LIMZO-A-3/210LIQZ0-LE-322L4/Q(配SP-ZM-TP)LIQZO-L-253/L4LIQZO-L-323/L4LIQZO-L-403/L4LIQZO-L-503/L4LIQZO-LE-253/L4/ILIQZO-LE-323/L4/ILIQZO-LE-403/L4/ILIQZO-LE-503/L4/ILIRA-1/210/VLIRA-2/210/V
阿托斯繼電器MAP-***MAP/160MAP-040MAP-160/20MAP-160/EMAP-210/20MAP-320MAP-320/EMAP-80
阿托斯葉片泵PFE-31016PFE-31016-1DTPFE-31022/1DTPFE-31028PFE-31028/1DUPFE-31028-1DTPFE-31036PFE-31036/1DPFE-31036/1DTPFE-31044/1DUPFE-41037PFE-41041-10TPFE-42070/1DVPFE-42070/3DWPFE-42070/3STPFE-51129/1DT PFE-51129/3DTPFE-51150/1DTPFED-43045/016-1DVOPFED-43070/036PFED-43070/044PFED-43085/036PFEXD-42085-43056/016-3DVOPFED-54090/045/1DTOPFE-41085/1DT
阿托斯齒輪泵PFG-120PFG-128PFG-142PFG-160PFG-174PFG-214/2OPFG-218PFG-221PFG-327/DPFG-340PFR-202PFR-203PFR-308PFRXC-518POX-262
atos柱塞泵PVL-210PVL-320PVL-440PVPC-C-3029/1DPVPC-C-3029-/1DPVPC-C-3029/1DC24PVPC-C-4046/1DPVPC-C-5073/1DPVPC-L-3029/1DPVPC-L-4046/1DPVPC-L-5073/1DPVPC-LW-5073/1DPVPCX2E-CZ-3029/31016/1DPVT-206
阿托斯流量閥QV-06/1QV-06/11QV-06/16QV-06/16-WGQV-06/24 QV-06/6QV-10/2QV-20/2QVHZO-A-06/36/24QVHZO-A-6/12QVKZOR-A-10/65RMU-010/210
直動式減壓閥 RZGO-A-010/100RZGO-A-033/100RZGO-A-033/210RZGO-A-033/31531RZGO-TERS-010/210RZGO-TERS-PS-033/100RZGO-TERS-PS-033/210
直動式溢流閥 RZMO-A-010/100RZMO-A-010/315RZMO-A-010/315/24RZMO-A-030/210RZMO-AE-010/315RZMO-P1-010/100RZMO-P1-010/210RZMO-TERS-PS-010/315RZMO-TERS-PS-030/315RZMO-TERS-PS-10/315/I
阿托斯插裝閥SC LI-25323SC LI-25421SC LI-32422SC LI-40322SC LI-40323SC LI-50322SC LI-50323SC LI-63332SCLI-16374SCLI-25374SCLI-32312SCLI-32331SCLI-40312SCLI-40331SCLI-40431
atos線圈電磁閥線圈電磁鐵SP-667SP-CAE-110/50/60ACSP-CAI-230SP-CAI-230/50/80SP-CART ARE-15/15SP-CART ARE-15/150SP-CART M-06/350SP-CART M-5/100SP-CART M5/350SP-CART-M6/100SP-CAU-24DC/80 U=24DC I=2.05ASP-COI-230ACSP-COU-230DCSP-COU-24DC/80 U=24DC I=1.43ASP-COUR-24DC/10 U=24DC I=1.39ASP-ZH-7PSP-ZH-7PSP-ZM-7PX-AQG-10X-AQM-6X-FHP-135/10EX-FHP-135/10EX-FHP-135/25X-FHP-65/10X-FHP-65/10VE
www.yuasa-battery.com.cn 湯淺蓄電池 www.otpbattery.com.cn OTP蓄電池
www.nppbattery.com NPP蓄電池 www.megbattery.com 梅蘭日蘭蓄電池
www.sinonteamdc.com 賽能蓄電池 www.kelongbattery.cn 科華蓄電池
www.kstarbattery.com 科士達蓄電池 www.forward-battery.cn 復華蓄電池
www.sdsacredsun.com 山東圣陽蓄電池 www.zhichengchampion.com 冠軍蓄電池
www.sacredsundc.com 圣陽蓄電池 www.cgbbattery.cn 長光蓄電池
www.exideword.com.cn 德國陽光蓄電池 www.whfiamm.com 非凡蓄電池
www.senrybattery.cn 光宇蓄電池
青島伊爾特自動化系統控制有限公司是為自動化領域提供視覺系統、視覺軟件、視覺傳感器和表面檢測系統的領先供應商,同時也是領先的工業ID讀碼器提供商,具備研發、銷售、技術支持為一體的綜合性的科技公司,先進的技術實力領先于視覺自動化市場,提供自動化工業解決方案,實現經濟性實用性最強的價值。
公司代理美國康耐視(COGNEX)視覺全系列產品、維朗光電(v-light)配套光源產品、瑞典伊薩(ESAB)切割自動化、美國捷銳、德國TBI等自動化行業品牌,可為客戶實現自動化集成解決一切問題的配套.制作加工等方案。優質的品牌質量優良的品牌服務實現客戶穩定的運行效率。
公司秉承:客戶核心第一,質量價值第一, 技術服務第一的經營理念,借鑒國內外先進的管理經驗全面為自動化行業客戶提供一流的服務和產品。公司自2011年創建以來已在電子行業、食品檢測行業、橡膠制造行業、汽車制造行業、機器人視覺行業、焊接自動化行業建立起廣大的客戶群體。我公司愿與廣大的同行業者共同發展共創未來。
主營產品:
康耐視工業讀碼器、工業固定安裝讀碼器、工業手持讀碼器、康耐視DataMan 503、康耐視Data Man 500、康耐視Data Man 300;康耐視DataMan 303、康耐視Data Man 200、康耐視Data Man 100、康耐視Data Man 60;美國康耐視(COGNEX)DataMan 50、讀碼器、視覺傳感器等產品;康耐視DataMan 9500、康耐視DataMan 8000系列;康耐視DataMan 750、康耐視IN-SIGHT 5000系列、康耐視IN-SIGHT Micro系列、康耐視IN-SIGHT 7000系列、康耐視Checker 4G系列、康耐視Checker 4GC系列、工業級視覺系統、視覺傳感器。
聯系方式青島伊爾特自動化系統控制有限公司
網址:http://www.qingdaoyierte.com和www.qingdaoyierte.com
銷售熱線:86-
傳 真:86-
手機號碼:18561900559
電子郵箱:kairuifeng_27@163.com
Q Q :3133103812
聯 系 人:周經理
職 務:銷售經理
郵 編:266000
銷售地址:青島經濟技術開發區峨眉山路396號光谷軟件園13棟
士林交流接觸器 |
S-2×100T |
S-2×P125T |
S-2×P150T |
S-2×P21 |
S-2×P25 |
S-2×P200T |
S-2×P30T |
S-2×P220T |
S-2×P35T |
S-2×P40T |
S-2×P50T |
S-2×P300T |
S-2×P60T |
S-2×P400T |
S-2×P80T |
S-P300T |
S-P400T |
M-600C |
S-P200T |
S-P220T |
S-P100T |
S-P125T |
S-P150T |
S-40T |
S-P50T |
S-P60T |
S-P35T |
S-30T |
S-P30TH |
S-P21 |
S-P25 |
S-P11 |
S-P12 |
S-P15 |
S-P16 |
S-PA9 |
S-P09 |
S-P06 |
S-P09 |
S-PA6 |
S-PA9 |
士林可逆式接觸器 |
S-2×P15 |
S-2×P16 |
RC-11C |
S-2×P11 |
S-2×P12 |
RC-11C |
EPower™控制器--不同凡響的功率控制技術 EPower控制器是歐陸功率控制器系列中的產品,它使用技術和創新設計來管理您的工藝并降低您的能源成本。它在各個層面都具有最能滿足您現在和將來需要的靈活性。讓我們使用EPower控制器為您進行功率控制,您大可放心:您的工藝已經實現了控制方式—即便是工藝有變化時。 歐陸擁有雄厚的研發實力,并制訂有持續開發、改進和創新的政策。 投資購買EPower控制器可在任何時候滿足您不斷變化的需求,給予您選擇的自由,讓新開發變得觸發可及。 創新的模塊性和可配置性,能滿足您的各種需求... 通過模塊化設計便于訂購、配置和維護。 EPower控制器可滿足您不斷變化的需求。 盡可能減少備件庫存—許多選項可通過共用驅動模塊配置,如觸發方式、負載、相位、控制等。 多達四個功率模塊可提供單相和多相控制。 可通過軟件配置的選項更具靈活性。
您不會再受到訂購可選件的限制—EPower控制器為您提供可配置的可選件和模塊化硬件,讓您能靈活地適應現在和將來的要求。加上便于通過集成顯示屏進行配置和通過iTools配置工具實現圖形配置的標準儀器—您的功率控制器讓生活變化更加簡單。 靈活性–采用的模塊化技術,易于使用,能滿足功率控制的需要。 --具有創新功能的功率控制,能在上降低能源成本,工藝性能出眾。 放心—可讓您收回投資的功率控制器,可適應您今后的需求變化-一種產品可適合于各種方案。
您需要的可選件... 單個驅動模塊可支持多達四個功率模塊--從而支持四條獨立的控制回路。功率模塊的額定電流范圍為100A到400A。驅動模塊本身還支持可選件板卡,讓您的解決方案更具靈活性。 通信– RS485 Modbus RTU, Profibus, DeviceNet® 和Modbus TCP網絡協議。 預估負載管理(PLM)* –能管理多臺機器的功率需求以節省能源成本的強大功能。
靈活的輸入/輸出–本驅動模塊支持標準的輸入/輸出接口和多達三塊帶模擬輸入接口、模擬輸出接口、數字輸入/輸出接口和繼電器輸出接口的附加輸入/輸出板卡。 * 正在申請專利 選購指南和技術規格
EPower CONTROLLER EUROTHERM® FLEXIBLE SOLUTIONS THE FUTURE OF POWER CONTROL ™ PLM PLM PLM Predictive Load Management EPower Controllers are the latest products in the Eurotherm range of power controllers. It uses the newest technologiesinnovations to manage your process and reduce your energy costs. On every level it brings you the flexibility you need to best meet your requirements nowin the future. Let us look after your power control for you with EPower Controllersgive you the peace of mind that you have the best for your process – even as it changes. Eurotherm has a significant R&D capabilitya policy of continuous development, improvementinnovation. Investing in EPower Controllers will keep optionsnew developments within your reach as you can upgrade to meet your changing requirements at any point. Flexibility – advanced technologies in harmony with modularityease of use to deliver your power control needs Efficiency – world class power control with innovative features to minimise your energy costs with exceptional process performance Peace of mind – a power controller that will bring you return on investmentcan be adapted in the future if your requirements change - one product for all solutions Revolutionary modularity and configurability to meet your needs... Easy ordering, configurationmaintenance through modular design If your requirements change EPower Controller can be easily adapted to your needs Minimum spares holding – many options configurable through a common driver module e.g. firing mode, load, phases, control etc. Up to four power modules provide single and multi-phase control Software configurable options to bring you flexibility: You no longer need to be restricted to the options that you order – EPower Controller provides you with configurable optionsmodular hardware to give you the flexibility to match your process nowin the future. Combine this with an instrument that provides easy configuration via the integral displayfull graphical configuration via iTools PC configuration tool as standard – you have a power controller that makes life that bit easier. www.eurotherm.com/EPower EPower™ Controller – extraordinary power control Control Type Single phase 2 x single phase 3 x single phase 4 x single phase Two phase 2 x two phase True three phase Firing Modes Phase angle Half cycle Burst firing Fix modulation period Logic mode Load Type Standard Resistive Complex Resistive Inductive e.g. Transformer Short Wave Infrared Load Configuration Single phase Star Delta Star with neutral Open Delta Feedback V2 I2 True power RMS load voltage RMS load current Open loop The options that you need... A single driver module can support up to four power modules –hence four independent control loops. Power modules are available in current ratings covering a range from 100A to 400A. The driver module itself supports option boards to give you additional flexibility in your solution: Communications – RS485 Modbus RTU, Profibus, DeviceNet®Modbus TCP network protocols Predictive Load Management (PLM)* – A powerful feature to effectively manage your power requirements across multiple machines to save on your energy costs Flexible I/O – The driver module supports standard I/Oup to three additional I/O boards with analogue inputs, analogue outputs, digital I/O and relay outputs. * patent pending PLM PLM PLM Predictive Load Management The EPower Controller has been designed for easy configurationmodification. The front, integral display has a “QuickStart” facility that leads the user through initial set up in a series of simple steps. To further save engineering this QuickStart code can be specified with your orderthe instrument shipped pre-configured. More advanced configuration can be achieved utilising iTools PC configuration software – which provides the significant assistance of graphical wiring tools and downloadable function blocks to minimise engineering timecost. Once you have created your application you can easily saveclone your work – either as a back-up or to download to multiple instruments that need the same or similar configuration – keeping your work safesave repeat engineering costs. “QuickStart” for easy commissioning Easy saveclone of configuration Advanced graphical wiring configuration tools Integral front panel operator interface www.eurotherm.com/ E Power Easy configuration to save you engineering costs ... www.eurotherm.com/EPower EPower Controllers have measurement accuracy, functionalityinnovation that will deliver you extraordinary power control to help your process, environmentbudget. Measurement accuracy (better than 1%) to help save energy Load management for better distribution of energyto minimise peak energy usage costs Reduce energy billsother costs with a selection of advanced firing modes to best suit your load type: – Minimise electrical disturbance – Increase lifetime of heater elements Improve power factor Energy saving Easy maintenance Efficiency through advanced technologies... You can reduce your energy costs across your plant by utilising the Predictive Load Management (patent pending) functionality within the EPower Controller. This new feature provides a better distribution of energy across different loads in your installation, by managing the priority and, if necessary, load shedding, The EPower Controller prevents overshoot of the nominal power. This will keep you within the limits of your electrical contract for your installationprevent increases in energy tariffs imposed by your supplier. Unlike other software offering this type of feature, Predictive Load Management from Eurotherm anticipates your energy usage rather than just reacting when you have already exceeded your tariff peak. Using EPower Controllers with Predictive Load Management could well be one of the best value decisions you could make for your plant! www.eurotherm.com/ E Power Predictive Load Management – the best innovation for energy management Power consumed with “Predictive Load Management” PLM PLM PLM Predictive Load Management Power consumed without “Predictive Load Management” www.eurotherm.com/EPower A product to integrate into a complete solution EPower Controllers have not only been designed to be world-class power controllers that you can rely on, they have been designed to integrate perfectly into a wider control system. Whatever your system communication preferences are – Modbus RTU, Profibus, DeviceNet, Modbus TCP/IP – EPower Controllers can easily be integrated into your systemsend the information you need about your load (current, voltage, alarms etc) so that you stay in control of your process. Whether you need this latest power controller in a new system or to upgrade an existing system – Eurotherm can help you. Our expertise is not limited to power control – the full benefit of EPower Controllers can be optimised using our engineers as experts in creating complete solutionstotal, plant-wide DCS. Throughout our product ranges – controllers, recorders, power controllers, signal conditioning, automation solutionsDCS – you will get expert knowledge, supportworld class solutions. We can assist you with smalllarge applicationsoffer complete life cycle supportpartnership engineering teams – whatever you need, we are there to work with you. 3RD PARTY INTEGRATION OPERATIONS SERVER OPC SERVER BUSINESS SYSTEMS OPE V T820 LOCAL HMI 3216 CONTROLLER T2550 PROGRAMMABLE AUTOMATION CONTROLLER T2550 PROGRAMMAB AUTOMATION CONT EPOWER CONTROLLER www.eurotherm.com/ E Power 3RD PARTY INTEGRATION EYCON 20 VISUAL SUPERVISOR EYCON™ 10 VISUAL SUPERVISOR 6180A PAPERLESS GRAPHIC RECORDER ERATIONS VIEWER ACTIVE FACTORY T820 LOCAL HMI 32H8I EPOWER CONTROLLER REMOTE DISPLAY BLE TROLLER EPOWER CONTROLLER www.eurotherm.com/EPower Real-world applications VACUUM FURNACE IN HEAT TREATMENT BOOSTING POWER CONTROL AND MONITORING IN GLASS INDUSTRY Molten glass is a conductor of electricity. Passing high currents through the glass produces direct heating in the resistance presented by the glass, named boosting. This heating is beneficial as it heats the‘colder’ bottom glass in the furnace. This heated bottom glass rises towards the tophas a stirring effect which helps with melting, heat transfertemperature homogenisation. Boosting is often used to meet periodic fluctuations in production demand or to support the pull rate of a furnace at the end of its operating life. Boosting may also help to reduce NOx emissions. In this application the EPower Controller is controlling the power injected by the electrodes in the molten glass while controlling the true power or the current (the power injected is self compensated by the glass temperature) Controlled convection currents to promote homogeneity Accurate true power or electrodes current control Digital communication allowing process parameters to be monitored by a supervisor: current, voltage, poweralarms Electrodes Molten glass Three phase power supply T2550 Input/output control Eycon™ Visual Supervisor Vacuum furnace control Energy control Efficiency optimization EPower Controller Control Modularity Energy information Several switching modes iTools software configuration Digital communications Vacuum device Digital communication COMPOSITE MATERIAL In composite material production polymerisation is made in an autoclave at very high temperature. EPower Controller controls heating by providing: Detection of total and/or partial load failure Optimization of the distribution of heating control in the different areas providing real cost savings Standard communications for process controlmonitoring on HMI Down time reduction due to the modular design Policeman/Remote display Heater element control Power repartition in heating elements providing energy saving Alarm strategy Digital communication allowing supervisory control Use Predictive Load Management across multiple furnaces to reduce energy costs PLM PLM PLM Predictive Load Management Melting is one of the first steps in the ‘float’ process’. At this stage glass is in liquid state in a molten furnace at around 1550°C. Roof heating is made by silicon carbide heaters. EPower Controller controllers provide all the solutions to the multizone control of this specific heater elements. Ageing compensation of the silicon carbide heaters with power control Power distribution control in the heater elements providing cost savings: suppression of inrush current for a better energy managementa minimum stress on the power transformers Digital communication with standard protocols for an efficient process monitoring Use Predictive Load Management across the glass plant to reduce energy costs www.eurotherm.com/ E Power SEMICONDUCTOR MANUFACTURING Silicon was discovered in 1823 and is used in the manufacture of today''s semiconductors. Semiconductors need a silicon of a very high purity and, therefore, the silicon is transformed by successive stages (crystal growing, epitaxy) that need very slowaccurate heating. The EPower Controller will provide many solutions to this specific and expensive process: Precisesteady control of the heater elements Advancedconfigurable strategy enables the EPower Controller to adapt to the load state Secure your process utilising a comprehensive alarm strategyby transferring process information to a supervisor CONTINUOUS ANNEALING FURNACE After castingmilling, metals are passed through an annealing furnace in order to increase ductilityreduce brittleness. In the case of a continuous metal sheet, this is a multi-zone furnace consuming several Megawatts of power. Each zone consists of one or multiple thermocouples feeding the process variable (PV) into a temperature controller, Programmable Automation Controller (T2550 PAC) or PLC. The control device then calculates the required power input to meet the process set point (SP),sends this to the Power Controller via digital comms or via an analogue signal. The Power Controller then fires the element, either directly or via a transformer depending on the element specifications. Two-leg, true three phase control or 4 x single phase control available Load Sequencing - integral firing sequence control optimises instantaneous energy consumption across all zones Load Shedding - Predictive Load Management peak energy demand algorithm enables power smoothing to reduce peak demand Communication of PV, SPprocess data Remote configuration via comms or user interface TIN BATH FURNACE IN FLOAT MANUFACTURING Three phase power supply Multizone control Molten glass Multizone heating Roof heating with silicon carbide elements Supervisor Slave Master Network Multiple Slaves (1 per Zone) Zone 1 Zone n Continuous Annealing Furnace Transformer Transformer Molten tin PLM PLM PLM Predictive Load Management PLM PLM PLM Predictive Load Management With EPower Controllers you are not only buying one of the best power controllers in the world, you are supported by a global network of application and control specialists from Eurotherm. While we are a truly global company, we have not forgotten that you still need local supportunderstanding. Our team will bring you technical expertise along with in depth experienceunderstanding in numerous application areas – from glass furnaces, to semiconductor manufacture, to the heat treatment of metalsmany more. The EPower Controller is one product for all your solution needs. We can provide you with a range of services to suit your needs – from training to commissioning and maintenance contracts for your installation. Easy Maintenance Modular design for easy management of spare partsquick mean time to repair (MTTR) Fasteasy configuration Easy wiring, installationcommissioning Remote Display option www.eurotherm.com/EPower The EPower Controller – the best solution for your power control With EPower Controllers, you will obtain an excellent return on your investment www.eurotherm.com/ E Power Selection guidetechnical specifications DRIVER MODULE POWER MODULES (UP TO 4) SUPPLY VOLTAGE 85 to 264V ac SUPPLY FREQUENCY 47 to 63Hz POWER CONSUMPTION 120W TEMPERATURE LIMITS 0 to 50°C operating, -10 to 70°C Storage DISPLAY 4 lines dot LCD matrix array COMMUNICATIONS Modbus RTU 2 wire EIA485 Modbus TCP/IP 10baseT Ethernet Profibus DPv1 DeviceNet network protocol INPUTS AND OUTPUTS Standard 2 Analogue inputs 1 Analogue output 2 Digital inputs 2 Relay outputs (1= Watchdog) Optional modules (max 3) Per module - 1 Analogue input 1 Analogue output 2 Digital inputs 1 Relay MEASUREMENT ACCURACY Better than 1% REMOTE PANEL Dedicated remote panel port PlugPlay 32h8i panel indicator QUICKSTART Configurable by order code or on start up via dedicated front panel HMI PREDICTIVE LOAD MANAGEMENT (PLM) Optional module connecting up to 63 instruments over dedicated communications (CAN based). Configurable PLM (patent Pending) optimises energy usage APPROVALS CE (EN 60947-4-3), UL 508A VOLTAGE RANGES 100 to 600V ac, 100 to 690V ac CURRENT RANGES 100A, 160A, 250A, 400A, Nominal current range 16 to 400A FREQUENCY 47 to 63Hz POWER DISSIPATION 1.3 watts per Amp per Power module OPERATING TEMPERATURE Nominally 40°C, Operation 0 to 50°C de-rating applied over 40°C COOLING FANS ≥160A FAN SUPPLY 115V or 230V FIRING MODES Phase angle Half Cycle Burst Firing Fixed Modulation Logic LOAD TYPES Standard Resistive Complex Resistive Inductive loads e.g. Transformer LOAD CONFIGURATION Single phase Ph/Ph or Ph/N Two leg control 3 wire star or delta Three phase control 3 or 4 wire star, 3 or 6 wire delta POWER MODULE COMBINATIONS 1, 2, 3 or 4 single phase (1, 2, 3 or 4 modules) 1, or 2 x two leg (2 or 4 modules) 1 x 3 phase (3 modules) FEEDBACK Internal voltagecurrent Order option – External voltagecurrent FEEDBACK TYPES Open Loop V2 I2 True Power Vrms Irms APPROVALS CE (EN 60947-4-3), UL 508A
噴嘴材質:1Cr18Ni9Ti;
管道材質:20號鋼、
12Cr1MoV、
10CrMo910